- Overview
- Product Description
- Product advantages
- Scope of application
- Instructions for us
- Packaging & Shipping
Basic Info.
Model NO.
Gw Vertical Pipeline Pump
Influent Type of Impeller
Single Suction Pump
Position of Pump Shaft
Horizontal Pump
Pump Casing Combined
Horizontal Split Pumps
Mounting Height
Since Irrigation Centrifugal Pumps
Impeller
Open
Usage
Pump, Pumps, Condensate Pump, Slurry Pump, Circulating Pump
Transport Package
Wooden Box
Specification
as request
Trademark
Huatao
Origin
China
HS Code
841381
Production Capacity
1000 Sets Per Month
Product Description
Gw Vertical Pipeline Non-Clogging Sewage Dirt Drain Pump
Pipeline non-clogging sewage pump has a unique effect in discharging solid particles and long fiber waste. Compared with the traditional impeller, the impeller of the pump adopts the form of single flow channel or double flow channel, which is similar to an elbow with the same cross-sectional size and has very good flow performance. With a reasonable volute chamber, the pump has high efficiency. The impeller has passed the dynamic and static balance test, so that the pump has no vibration during operation.
1. It has the characteristics of remarkable energy-saving effect, anti-winding, no clogging, automatic installation and automatic control.
2. The center lines of the inlet and outlet are on the same horizontal line and the flanges are the same, so the installation and disassembly are very convenient, the floor space is small, and it can be installed at any position in the pipeline like a valve.3. The pump and the motor are directly connected and coaxial, which is a mechatronics product with compact structure and stable performance.
4. The anti-clogging hydraulic component design with large flow channel greatly improves the passing capacity of dirt, and can effectively pass through fibrous materials 5 times the diameter of the pump and solid particles whose diameter is about 50% of the pump diameter.
5. Reasonable design, reasonable supporting motor, high efficiency and remarkable energy-saving effect.
6. The mechanical seal adopts hard and wear-resistant tungsten carbide, which is durable and wear-resistant, and can make the pump run safely and continuously for more than 8000 hours.
7. Advanced hydraulic performance, high machine efficiency and low operating noise.
1, Chemical, petroleum, pharmaceutical, mining, paper industry, cement plant, steel plant, power plant, coal processing industry.
2, Sewage and sewage with particles in the drainage system of urban sewage treatment plants, municipal engineering, construction sites and other industries.
3, For pumping clean water and corrosive media.
2, Sewage and sewage with particles in the drainage system of urban sewage treatment plants, municipal engineering, construction sites and other industries.
3, For pumping clean water and corrosive media.
1. First check to see if the exterior fasteners have come loose in transit.
2. Check whether the power supply voltage meets the requirements on the motor.3. Turn on the power for a trial run to see if the impeller rotates in the direction indicated on the pump. If the direction is reversed, just reverse any two-phase wires in the cable. The time for the trial run should not be too long to avoid burning the seal.
4. Install the pump and start it up. It is best to install the pump foot screws.
5. Non-clogging pipeline pumps and pipelines should have their own supports, and the weight of the pipeline should not act on the pump.
6. If the discharge pipeline of the sewage pump is equipped with a check valve, it should be installed outside the intermediate valve.
7. For the convenience of maintenance and safe use of the pipeline sewage pump, a regulating valve is installed on the inlet and outlet pipelines of the pump and a pressure gauge is installed near the pump outlet to ensure that the pump operates within the rated head and flow range, ensuring that the pump The normal operation of the pump improves the service life of the pump.
8. When installing the pipeline type sewage pump, the anchor bolts must be tightened to avoid the impact of vibration on the performance of the pump when starting.
9. In order not to cause the pump to bear the thermal deformation of the pipeline when the pipeline pump is transporting high-temperature liquid, the foot bolts of the pump base should not be fixed. When the pipeline system expands with heat and contracts with cold, the pump can move together with the pipeline.
