- Overview
- Product Description
- Detailed Photos
- Product Parameters
- Certifications
- Packaging & Shipping
- Company Profile
- Customer Photos
Basic Info.
Product Description
QFW-4000VI RPM Pipe Production Line
The QFW-4000VI RPM Pipe (Reinforced Plastics Mortar Pipe) Production Line has six parts, such as inner layer manufacturing machine, computer control adding mortar-winding machine, curing station, repairing machine, mould unloading machine and resin mix station. Its controlling center has been adopted the Taiwan's advanced STD industrial control computer. If the parameter of the wound products being inputted the computer, the design of the linearity for winding of the product will be finished automatically, then controlling the combined movements between the mound rolling speed and the running of the carriage. The pipes produced by the adding mortar-winding machine can decrease the cost and improve the stiffness through adding the mortar without bad influences upon the leak-proof layer and the structure layer.
The RPM pipe's cost has decreased 40% than the common FRP pipe; the stiffness has been improved greatly. It has many advantages, such as lightweight, anti-corrosion, lower roughness and proper price. It can be widely used in water supply and drainage, agricultural irrigation, petrochemical industry, ocean development, sewage treatment, etc. The production line annual capacity is 5000t, and reasonable structures, latest design, operate easily, high-grade automation are its characteristics.It got the good valuation from the clients.
2.The main parameters
2.1The total power: 193.6kw
2.2The maximum diameter can be manufactured: DN4000mm
2.3The effective length of the pipe: 12000mm
2.4The productivity: 1000kg/h
2.5The baking board's temperature of curing station: 105-160ºC
2.6The maxi speed of conveying roving: 90m/min
2.7The maxi width of roving sheet: 200mm
2.8The maxi speed of sand conveyance: 100kg/min
2.9The maxi mould-unloading force: 83t
2.10The rated drawing force of the capstan: 5t
2.11The rated lifting force of the supporting pipe trolley: 40t
2.12The rated pressure of the hydraulic system: 16Mpa
2.13The central height of mould-unloading machine: 2000mm
2.14The central height of the other single machine: 1500mm
| Model | Diameter range (mm) | Pipe Length can be produced |
| QFW-300 | DN15-DN300 | 1.5m, 2m, 3m, 4m, 6m |
| QFW-1200 | DN300-DN1200 | 3m, 6m, 9m, 12m |
| QFW-2500 | DN300-DN2500 | 3m, 6m, 9m, 12m |
| QFW-3200 | DN300-DN3200 | 3m, 6m, 9m, 12m |
| QFW-4000 | DN300-4000 | 3m, 6m, 9m, 12m |
Hengshui Jiubo Composites Co., Ltd. not only have manufacture ability, but also has design ability of material, structure and products, our company can provide customers with technical advice, supply of goods and material, transportation, installation supervision etc service.
FRP tank and chemical equipment
High, middle, low pressure FRP pipe
FRP small-scaled wastewater treatment tank
FRP cooling tower
FRP pultrusion, molded series products
FRP polymer electrolytic cells
S/F, F/F double-wall oil fuel storage tank
Whole set of computer control filament winding machine
Whole set of FRP pultrusion machine
Whole set of FRP molded hydraulic press
Whole set of FRP grating molded machine
